1, Shoulder joint traction frame is a product specially designed for shoulder arthroscopy surgery, and the shoulder arthroscopic surgery is completed by pulling the arm
2, Shoulder traction frame is mainly used for shoulder arthroscopic surgery, used for muscle tearing, elbow wrist traction, simple structure, more convenient operation
3, The shoulder traction system only needs to rotate the tension adjustment wheel to obtain maximum traction ,
4, The traction force ofthe traction frame on the patient's arm can be adjusted, and the shoulder traction surgery needs to be equipped with a disposable sleeve joint traction frame through three hanging rings, and the weight ofthe weight or brine bag is configured according to the patient's requirements at different angles to change the size ofthe traction force. The force, angle, height etc. of the traction can be adjusted, which is very convenient to use
5, The traction frame is safe, stable, high and low adjustable, rotating left and right and canbe rotated in one direction 180 ° .
6, The shoulder joint traction frame is ins:alled on the edge rail ofthe operating table, and the arm ofthe patient in the diagonal position is pulled diagonally to the side of the lying position
7, Standard with movable trolley, the main body ofthe traction frame canbe folded, easy to store
Specification:
Length and Width |
1300*1100mm |
The traction arm adjust range |
750-1250mm |
Traction arm up/down adjust angle |
±20° |
Traction pull line bearing tension |
750N |
Round rotating device adjust angle |
±60° |
Side rail locking install size |
customized |
Instrument cart size |
L 750*W730*H770mm |